Research output

Achieving exceptional creep resistance in rare-earth-free Mg-base alloys by engineering the shape, size and fraction of eutectic, particles and precipitates
Koundinya N T B N and Kottada, R. S.
Scripta Materialia, 162, 121-126 (2019)
Scrip. Mater.
On the role of Al and Zn addition on eutectic morphology in Mg-3Ca-2Sn cast alloy
Koundinya N T B N and Kottada, R. S.
Scripta Materialia, 162, 432-436 (2019)
Scrip. Mater.
A simple and versatile machine for creep testing at low loads (6–300 N) and on miniaturized specimens: Application to a Mg-base alloy
Koundinya N T B N, Nandha Kumar, E., Chawake, N., Korla, R., and Kottada, R. S.
Review of Scientific Instruments, 89(10), 105102 (2018)
Rev. Sci. Instrum.
Assessment of the post-dynamic recrystallization effects on the overall dynamic recrystallization kinetics in a Ni-base superalloy
Koundinya N T B N, Karnati, A. K., Sahadevan, A., Narayana Murty, S. V. S., and Kottada, R. S.
Journal of Alloys and Compounds, 930, 167412 (2023)
Journ. Alloy. Compo.
Distinct role of eutectic morphology on the plastic flow in cast Mg–3Ca alloy
Koundinya N T B N and Kottada, R. S.
Materials Science and Engineering: A, 791, 139633 (2020)
Mater. Scien. Engin.
Unravelling the dominant influence of microsegregation on creep rupture behaviour of additively manufactured Inconel 718
Sabari, S. R., Koundinya N T B N, Godha, A., Makineni, S. K., Narayana Murty, S. V. S., Nagesha, B. K., Janaki Ram, G. D., and Kottada, R. S.
Materials Science and Engineering: A, 919, 147480 (2025)
Mater. Scien. Engin.
Understanding the sigmoidal primary creep behaviour in a multi-component solid-solution Co-base alloy between 700 – 850 °C
Karnati, A. K., Koundinya N T B N, Majila, A. N., Chandru, F. D., and Kottada, R. S.
Materialia, 34, 102098 (2024)
Mater.
On the substructure evolution and its distinct role on dynamic strain aging in a multi-component cobalt base alloy at intermediate temperatures (300 to 700 °C)
Karnati, A. K., Koundinya N T B N, Majila, A. N., Chandru, F. D., and Kottada, R. S.
Scripta Materialia, 234, 115583 (2023)
Scrip. Mater.
Contrasting Impact of Peak-Aging Treatments on the Microstructure–Mechanical Property Relationship at Room and Elevated Temperatures in Mg-1Al-0.28Ca-0.13Mn-0.05Si (wt.%) Alloy
Sanyal, S., Bhuyan, P., Karnati, A. K., Koundinya N T B N, Kottada, R. S., Bandyopadhyay, T. K., and Mandal, S.
JOM (2026)
JOM
Microstructural Evolution and Mechanical Behavior of Magnetically Impelled Arc Butt Welded Dissimilar Joints of Super304H and T91 Steel Pipes
Sahadevan, A., Ilangovan, R. K., Koundinya N T B N, Amirthalingam, M., Janaki Ram, G. D., and Kottada, R. S.
Journal of Materials Engineering and Performance, 35(12), 11852-11866 (2026)
Journ. Mater. Engin. Perfo.
Creep behaviour of additively manufactured nickel-based superalloys: a review
Sabari, S. R., Ilangovan, R. K., Koundinya N T B N, Amirthalingam, M., Janaki Ram, G. D., and Kottada, R. S.
Journal of Materials Science, 60(39), 18515-18548 (2025)
Journ. Mater. Scien.
Understanding the early stage (< 10 min) oxidation behaviour of a multi-principal element cobalt base solid solution superalloy at 1000 °C
Polimetla, V., Anupam, A., Koundinya N T B N, Ang, A. S. M., Berndt, C. C., and Kottada, R. S.
Corrosion Science, 255, 113143 (2025)
Corro. Scien.
First report of exploiting processing maps for producing metal foams of AlSiMg alloys
Georgy, K., Koundinya N T B N, Neu, T. R., García-Moreno, F., Mukherjee, M., and Kottada, R. S.
Journal of Alloys and Compounds, 1038, 182805 (2025)
Journ. Alloy. Compo.
Understanding the role of microstructure on creep anisotropy in additively manufactured IN718
Sabari, S. R., Koundinya N T B N, Narayana Murty, S. V. S., Nagesha, B. K., Janaki Ram, G. D., and Kottada, R. S.
Materials Characterization, 223, 114935 (2025)
Mater. Chara.
Unravelling the dominant influence of microsegregation on creep rupture behaviour of additively manufactured Inconel 718
Sabari, S. R., Koundinya N T B N, Godha, A., Makineni, S. K., Narayana Murty, S. V. S., Nagesha, B. K., Janaki Ram, G. D., and Kottada, R. S.
Materials Science and Engineering: A, 919, 147480 (2025)
Mater. Scien. Engin.
A distinct role of microstructure on hot corrosion behaviour of additively manufactured IN718
Mannava, V., Saravanan, T. T., Sabari, S. R., Koundinya N T B N, Venugopal, A., Narayana Murty, S. V. S., Govind, B., Kamaraj, M., and Kottada, R. S.
Corrosion Science, 241, 112550 (2024)
Corro. Scien.
Influence of powder surface chemistry on the defect formation in AlSi10Mg alloy processed via laser powder bed fusion additive manufacturing
Ilangovan, R. K., Koundinya N T B N, Krishnaswamy, H., Saravana Kumar, G., Amirthalingam, M., and Kottada, R. S.
Materialia, 34, 102102 (2024)
Mater.
Understanding the sigmoidal primary creep behaviour in a multi-component solid-solution Co-base alloy between 700 – 850 °C
Karnati, A. K., Koundinya N T B N, Majila, A. N., Chandru, F. D., and Kottada, R. S.
Materialia, 34, 102098 (2024)
Mater.
On the substructure evolution and its distinct role on dynamic strain aging in a multi-component cobalt base alloy at intermediate temperatures (300 to 700 °C)
Karnati, A. K., Koundinya N T B N, Majila, A. N., Chandru, F. D., and Kottada, R. S.
Scripta Materialia, 234, 115583 (2023)
Scrip. Mater.
Assessment of the post-dynamic recrystallization effects on the overall dynamic recrystallization kinetics in a Ni-base superalloy
Koundinya N T B N, Karnati, A. K., Sahadevan, A., Narayana Murty, S. V. S., and Kottada, R. S.
Journal of Alloys and Compounds, 930, 167412 (2023)
Journ. Alloy. Compo.
Unusual substructure evolution and post-dynamic recrystallization effects on flow softening mechanism in a γ′-free Co-base superalloy
Karnati, A. K., Koundinya N T B N, Majila, A. N., Chandru, F. D., and Kottada, R. S.
Materialia, 24, 101467 (2022)
Mater.
Hot corrosion-creep interaction in IN718 under simulated marine environment: Introducing strain-associated-time (SAT) plots for comprehensive understanding
Mannava, V. R., Koundinya N T B N, SambasivaRao, A., Paulose, N., Kamaraj, M., and Kottada, R. S.
Corrosion Science, 190, 109667 (2021)
Corro. Scien.
Synergetic influence of microconstituents on the damage accumulation and consequent effect on the flow behaviour in cast Mg–Ca–Sn alloys
Koundinya N T B N and Kottada, R. S.
Materials Science and Engineering: A, 799, 140167 (2021)
Mater. Scien. Engin.
Theoretical and experimental studies on thermal stability of nanocrystalline Mg–Mo alloy
Rai, N., Samantaray, B. K., Rajulapati, K. V., Ravi, R., Bakshi, S. R., Koundinya N T B N, Kottada, R. S., and Gollapudi, S.
Materialia, 14, 100933 (2020)
Mater.
Constitutive Modelling of Hot Deformation Behaviour of Nitrogen Alloyed Martensitic Stainless Steel
Krishna, S. C., Anoop, S., Koundinya N T B N, Karthick, N. K., Muneshwar, P., and Pant, B.
Transactions of the Indian National Academy of Engineering, 5(4), 769-777 (2020)
Trans. India. Natio. Acade.
Exploring the Safe Hot Working Regime of Creep-Resistant Mg-3Ca-2Sn-1Al Alloy
Koundinya N T B N, Rangan, K., Narayana Murty, S. V. S., and Kottada, R. S.
Materials Performance and Characterization, 9(2), 215-223 (2020)
Mater. Perform. Charact.
Understanding the Hot Working Behavior of a Ni-Base Superalloy XH 67 via Processing Map Approach
Koundinya N T B N, Sri Bharadwaj, K., Nandha Kumar, E., Narayana Murty, S. V. S., and Kottada, R. S.
Materials Performance and Characterization, 9(2), 224-236 (2020)
Mater. Perform. Charact.
Distinct role of eutectic morphology on the plastic flow in cast Mg–3Ca alloy
Koundinya N T B N and Kottada, R. S.
Materials Science and Engineering: A, 791, 139633 (2020)
Mater. Scien. Engin.
Synthesis and mechanical properties of TiCx and Ti(C,N) reinforced Titanium matrix in situ composites by reactive spark plasma sintering
Vasanthakumar, K., Ghosh, S., Koundinya N T B N, Ramaprabhu, S., and Bakshi, S. R.
Materials Science and Engineering: A, 759, 30-39 (2019)
Mater. Scien. Engin.
On the role of Al and Zn addition on eutectic morphology in Mg-3Ca-2Sn cast alloy
Koundinya N T B N and Kottada, R. S.
Scripta Materialia, 162, 432-436 (2019)
Scrip. Mater.
Achieving exceptional creep resistance in rare-earth-free Mg-base alloys by engineering the shape, size and fraction of eutectic, particles and precipitates
Koundinya N T B N and Kottada, R. S.
Scripta Materialia, 162, 121-126 (2019)
Scrip. Mater.
Hot deformation behaviour of Mg-3Al-3Sn and Mg-3Al-3Sn-1Zn Alloys: Role of Zn
Koundinya N T B N, Raman, L., Nandha Kumar, E., Chawake, N., and Kottada, R. S.
Materialia, 3, 274-287 (2018)
Mater.
A simple and versatile machine for creep testing at low loads (6–300 N) and on miniaturized specimens: Application to a Mg-base alloy
Koundinya N T B N, Nandha Kumar, E., Chawake, N., Korla, R., and Kottada, R. S.
Review of Scientific Instruments, 89(10), 105102 (2018)
Rev. Sci. Instrum.
Verification of correlation between densification during spark plasma sintering and compressive creep of ultrafine-grained in-situ Al2O3-reinforced B2 aluminide matrix composites
Chawake, N., Koundinya N T B N, and Kottada, R. S.
Journal of Alloys and Compounds, 735, 1921-1930 (2018)
Journ. Alloy. Compo.
Optimization of Hot Workability and Control of Microstructure in CF250 Grade Cobalt-Free Maraging Steel: An Approach Using Processing Maps
Chakravarthi, K. V. A., Koundinya N T B N, Narayana Murty, S. V. S., Sivakumar, D., and Nageswara Rao, B.
Metallography, Microstructure, and Analysis, 7(1), 35-47 (2018)
Metal. Micro. Analy.
Microstructure, properties and hot workability of M300 grade maraging steel
Chakravarthi, K. V. A., Koundinya N T B N, Narayana Murty, S. V. S., and Nageswara Rao, B.
Defence Technology, 14(1), 51-58 (2018)
Defen. Techn.
Optimization of Hot Workability and Control of Microstructure in 18Ni (M250 Grade) Maraging Steel Using Processing Maps
Chakravarthi, K. V. A., Koundinya N T B N, Sarkar, A., Narayana Murty, S. V. S., and Nageswara Rao, B.
Materials Performance and Characterization, 7(1), 547-561 (2018)
Mater. Perform. Charact.
Microstructural Evolution and Constitutive Relationship of M350 Grade Maraging Steel During Hot Deformation
Chakravarthi, K. V. A., Koundinya N T B N, Narayana Murty, S. V. S., and Nageswara Rao, B.
Journal of Materials Engineering and Performance, 26(3), 1174-1185 (2017)
Journ. Mater. Engin. Perfo.
Evolution of morphology and texture during high energy ball milling of Ni and Ni-5 wt%Cu powders
Chawake, N., Varanasi, R. S., Jaswanth, B., Pinto, L., Kashyap, S., Koundinya N T B N, Srivastav, A. K., Jain, A., Sundararaman, M., and Kottada, R. S.
Materials Characterization, 120, 90-96 (2016)
Mater. Chara.
Formation of amorphous alumina during sintering of nanocrystalline B2 aluminides
Chawake, N., Koundinya N T B N, Kashyap, S., Srivastav, A. K., Yadav, D., Mondal, R. A., and Kottada, R. S.
Materials Characterization, 119, 186-194 (2016)
Mater. Chara.
On correlation between densification kinetics during spark plasma sintering and compressive creep of B2 aluminides
Chawake, N., Koundinya N T B N, Srivastav, A. K., and Kottada, R. S.
Scripta Materialia, 107, 63-66 (2015)
Scrip. Mater.
Phase Evolution and Thermal Analysis of Nanocrystalline AlCrCuFeNiZn High Entropy Alloy Produced by Mechanical Alloying
Koundinya N T B N, Sajith Babu, C., Sivaprasad, K., Susila, P., Kishore Babu, N., and Baburao, J.
Journal of Materials Engineering and Performance, 22(10), 3077-3084 (2013)
Journ. Mater. Engin. Perfo.
Thermal analysis and nanoindentation studies on nanocrystalline AlCrNiFeZn high entropy alloy
Babu, C. S., Koundinya N T B N, Sivaprasad, K., & Szpunar, J. A.
Procedia Materials Science (2014)
Proce. Mater. Scien.